RESEARCH ARTICLE
A Study on the Treatment Method of Infectious Medical Waste for Needle Stick Injury Prevention
Jae-Joo Song1*, Gyoung-Wan Kim2, Seon-Mi Byeon3
1Department of Dental Hygiene, Chongam College, Sunchon city, Cheonnam, 57997, Korea
2Department of Emergency Medical Technology, Chongam College, Sunchon city, Chennam, 57997, Korea
3Dental Clinic of Ebarun, 28, ochon 7 gil, Sunchon city, Cheonnam, 57997, Korea
*Corresponding Author: Jae-Joo Song, E-mail: profesong@daum.net
Volume 6, Number 2, Pages 1–8, August 2018.
Korean J Clin Dent Hyg 2018;6(2):1–8.
Received on June 20, 2018, Revised on June 28, 2018, Accepted on July 23, 2018, Published on August 31, 2018.
Copyright © 2018 by Korean Society of Infection Control and Prevention in Dental Hygiene.
This is an Open Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License(http://creativecommons.org/licenses/by-nc/4.0/).
Abstract
Objectives: The purpose of this study was to improve the method of separating syringes and needle sticks from contaminated needles or putting them together in a disposal container to prevent sharp injury to clinician. Methods: In the test, a needle-melting device (needle smelter, Neo Top, Korea) was used. To check whether the needle was melting rapidly, the melting time was measured in relation to the rate of insertion of the needle in the hall of the melting apparatus. To confirm the sterilization of the used needle residues after using the needle-melting device, the sterilization experiment was performed using Bacillus subtilis. Sterilization was analyzed on the basis of the rate of decrease in the number of Bacillus subtilis. Results: The average time taken to melt all the needles used in the test depends on the insertion rate. However, on average, it could be melted within 2 to 3 seconds. After testing for the presence of infectious virus in the needle residues after melting, more than 99.9% of sterilization was possible. Conclusions: To prevent infections caused by needle stick sharps injuries, we propose to improve the infectious-waste disposal method by melting the needle safely and sterilizing it differently from the conventional method. 교신저자: 송재주 우편번호 57997 전남 순천시 녹색로 1641번지 청암대학교 치위생과 Tel: (061) 740-7312, Fax: (061) 740-7312, E-mail: profesong@daum.net 투고일: 2018. 06. 20. 심사일: 2018. 06. 28. 게재확정일: 2018. 07. 23. Acknowledgement: 이 논문은 2018년도 청암대학교의 연구비 지원을 받아 수행된 연구임
Keywords
Electrical arc discharge, Incineration, Infectious medical waste, Needle melter, Needle stick Injury